1¡¢ According to different zoning standards, lawn mowers can have the following zoning:

1. According to the driving method, it can be divided into towing type, rear actual type, riding type, and large tractor suspension type

2. According to the driving force driver method, it can be divided into animal power drivers, automotive engine drivers, power engineering drivers, and solar power generation drivers

3. According to the method of weeding, it can be divided into end milling cutter type, rotary cutter type, side wall hanging type, and swing blade type

4. According to the regulations for weeding, it can be divided into flat ground type, road starting type, and top cutting type

2¡¢ According to the driver method of lawn mowers, they can be divided into two categories: hand pulled lawn mowers and hydraulic lawn mowers

1. The aspect ratio of a hand pulled lawn mower is fixed, so there is no need to manually manipulate the aspect ratio. The output power is low, the noise is high, and the appearance design is exquisite and elegant, which can greatly reduce labor

In practical operation, it has been widely applied at this stage

2. The manual hydraulic motor of the hydraulic machine driver lawn mower is driven by an oil motor, which is the key to the rear drive of the hydraulic machine lawn mower. It is easy to operate and completes zero turns, and has been obtained in commercial services such as walk-in and riding lawn mowers

It has been widely used and has excellent operability driving force characteristics, which is crucial for general work

3¡¢ According to the operation method of the blade, it is divided into rotating blade type lawn mowers and end milling blade type lawn mowers

1. The rotary blade type lawn mower is suitable for obtaining pure natural green feed and planting green feed. It can be divided into two types according to the driving force transmission method 8: upper transmission system type and lower transmission system type

The main characteristics are simple construction, reliable practical operation, convenient adjustment, stable transmission system, no need for inertial force balance, no knife blockage, and high working speed with less maintenance. Its defects are large heavy cutting area and irregular stubble cutting

2. The end milling cutter type lawn mower is mainly suitable for flat and high-quality grasslands, such as various sports fields. The end milling cutter type lawn mower has hand push stepper motor self-propelled, ride on, and large tractor operation

The laser cutting and potting key of the end milling cutter type grass plow consists of an end milling cutter (opening cutter) and a bottom cutter (fixed cutter). The end milling cutter looks like a circular squirrel cage, and the cutter is installed in a spiral shape on the surface of the cylinder

On the top, the rotation of the end milling cutter pushes the grass stem relative to the bottom cutter, causing a slow laser cutting rolling cutting that breaks the grass stem. The quality of the end milling cutter type lawn mower's hoeing depends on the blade glue on the end milling cutter and the speed of the end milling cutter

The more bits there are on the end milling cutter, the more frequent the cutting of the side is per unit length of travel, and the finer the grass is cut; The number of cutting heads on an end milling cutter generally varies from 3 to 12. The higher the speed ratio of the end milling cutter, the more grass is cut Fine